top of page
Surfboard
3D Ptinted Surf board 60 cm wall art.
After Downloading a 3D stl file .
Using the Slicer program associated with a Qidi 3D printer to slice the file into 3 parts.
With PLA + filament and 10% infill.
![20240914_184303[1]](https://static.wixstatic.com/media/4fd004_c5168b27b2224a15bf7046ff167f67c7~mv2.jpg/v1/fill/w_250,h_336,al_c,q_90,enc_auto/4fd004_c5168b27b2224a15bf7046ff167f67c7~mv2.jpg) | ![20240914_184531[1]](https://static.wixstatic.com/media/4fd004_c615c80faec24abca0a03a5cca2ea383~mv2.jpg/v1/fill/w_250,h_169,al_c,q_90,enc_auto/4fd004_c615c80faec24abca0a03a5cca2ea383~mv2.jpg) |
|---|---|
 |  |
 |  |
 |  |
![20240914_184531[1].jpg](https://static.wixstatic.com/media/4fd004_a3aa7a86f0b24fab9aa50319c501fb2a~mv2.jpg/v1/fill/w_324,h_216,al_c,q_80,usm_0.66_1.00_0.01,enc_avif,quality_auto/20240914_184531%5B1%5D.jpg)
After 3 days of printing the parts were glued together using epoxy resin.
Using Baking soda and epoxy resin to make a putty to fill the gaps.
After two coats of filler and primer, the board was sanded using a small electric sander to sand the surfboard smooth.
Using a printed design the outline was traced onto the board.
bottom of page